10K Scissor
Alignment Lift
Models: 4810605AF, 4810605AFX, 4810605AFM, 4810605AFMX
Available in two wheel base lengths as surface or flush mount models! The 10,000 lb. capacity scissor alignment lift is the sophmore to the heavier duty big brother 14,000 lb. capacity scissor alignment lifts. Start lower, rise higher and take up less bay space. Five scissor lifts can fit in the same operating space as four 4-post lifts.
Surface mount installed units are only 8.5 inches high, with 52 inch long "no scuff" approach ramps allowing easy drive on approach of low profile vehicles.
→ Key Benefits
→ Optional Accessories
→ Specifications
Five Scissor Lifts Fit in the Same Space as Four 4-Post Lifts!
- Totally open access between the runways front to rear.
- 10,000 lbs. lifting capability.
- "Proportionally Controlled - Hydraulic Synchronized" lifting systems with 2 powerful heavy duty lifting cylinders to maintain level from floor to 73" of lifting height.
- Contained top and bottom UHMW slide blocks for smooth and uniform lifting.
- Large twin interlocking serri-form mechanical safety racks with 18 level and locked positions.
- Durable 72", "Right Side Up" flush mount, maintenance free slip plates. Oversized roller balls rotate on the underside of each slip plate and not on the runway surface. Strategically positioned openings in the runway under each slip plate quickly disperse water and dirt for maintenance free reliable performance.
- Reinforced 26" wide "Coach" style runways, alignment accuracy for cars and dual wheel trucks.
- 2 work steps, 8 positions on each runway, easy access to under hood for steering adjustments.
- Triple safety system, air actuated mechanical locks, pressure sensing flow control valves and velocity fuses.
- Low profile stance of 9" allows gentle drive on approach for low profile vehicles.
- Compact, enclosed control console protects core components from the shop environment.
- Full length base frame accommodates fast installation and adds to rugged durability.
- Standard, in-rack air kit for rolling jacks and air tools.
- ALI / ETL / CSA certified
Flush Mount (Model No. 4810605AFM)
Surface Mount (Model No. 4810605AFX)
- Air/Hydraulic Rolling Jacks for wheel free lifting.
- Stainless Steel Front Radius Turnplates slide on a UHMW layer preventing deck scratching.
- Drive-thru Kit
John Bean Roller Jacks
John Bean’s complete line of air-hydraulic roller jacks are versatile, durable and optimize the profitability of any lift. A low profile design eliminates the need to swing away when lift is lowered. A high lifting height enables more access for under-car repairs. Interchangeable adapters make lifting fast for brake work and tire service on passenger cars, light trucks and vans. Easy to maintain and built to last.
| Model: | JBC215 |
| Capacity: | 7,000 lbs. |
| Lift Pad Height: | 3" & 6" stacks |
| Raised Height: | 13" |
| Lowered Height: | 3" above runway |
| Shipping Weight: | 350 lbs. |
| 4810605AF | 4810605AFX | 4810605AFM | 4810605AFMX | |
|---|---|---|---|---|
| Full Open Center: | Yes | Yes | Yes | Yes |
| 4-Wheel Alignment Wheel Base (min/max): | 84.5" / 155" | 84.5" / 155" | 84.5" / 155" | 84.5" / 155" |
| 2-Wheel Alignment Wheel Base: | 165" | 175" | 165" | 175" |
| General Service Max. Wheel Base: | 179" | 189" | 179" | 189" |
| Deck Surface Length: | 195.5" | 205.5" | 195.5" | 205.5" |
| Lifting Capacity: | 10,000 lbs. | 10,000 lbs. | 10,000 lbs. | 10,000 lbs. |
| Overall Width: | 92.75" | 92.75" | 92.75" | 92.75" |
| Runway Width: | 26" | 26" | 26" | 26" |
| Overall Length: | 254.625" | 264.625" | 218.625" | 228.625" |
| Maximum Raised Height: | 73.5" | 73.5" | 73.5" | 73.5" |
| Minimum Lowered Height: | 9" | 9" | 9" | 9" |
| Shipping Weight: | 4,430 lbs. | 4,630 lbs. | 4,280 lbs. | 4,480 lbs. |
| Lift Time: | 80 sec. | 80 sec. | 80 sec. | 80 sec. |
| Lowering Time: | 60 sec. | 60 sec. | 60 sec. | 60 sec. |
| Standard Power Requirements: | 230V,1 Ph, 60 Hz | 230V,1 Ph, 60 Hz | 230V,1 Ph, 60 Hz | 230V,1 Ph, 60 Hz |
Line Drawings
Models 4810605AF & 4810605AFX
This diagram is for promotion illustration purposes only, and should not be used as installation instructions. Contact your local Equipment Sales Specialist if further information is needed.
Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders. ©2008 Snap-on Incorporated. All rights reserved. By accessing and using this website, you agree that you have read and are bound by the terms and conditions set forth in the Terms & Conditions of Use, including the arbitration provisions.
