14K Scissor
Alignment Lift
Model: 4814605AF (Surface Mount)
Model: 4814605AFFM (Flush Mount)
Add versatility and productivity to your alignment bay. 14,000 lb. capacity scissor alignment lifts take up less space, start lower, rise higher, and fit into narrower bays. Durable 72-inch "right-side-up" flush mount maintenance free rear slip plates have strategically positioned openings preventing water and dirt build up.
The lifts easily accommodate dual wheeled trucks with its 26-inch wide runways. There is no more need to explain to customers why the outside wheel of a dually hanging off the runway does not effect the alignment.
Four heavy-duty cylinders maintain constant level and safety, using "cross flow hydraulic technology", pressure sensing flow control valves, velocity fuses and large twin interlocking mechanical locks with air release system.
Two versions available, surface mount and flush mount. Flush mount installations provide zero drive-on approach, easy for the lowest profile vehicle.
Ideal for locations with low ceiling heights needing a clear floor look and added bay space.
→ Key Benefits
→ Specifications
- Totally open access between the decks front to rear
- 210" deck length with 154" 4-wheel or 178" 2-wheel alignment wheelbase (186" service)
- "Quad counterpoised" lifting system with 4 powerful heavy-duty cylinders to maintain a constant level from floor to full lift height
- Contained top and bottom UHMW slide blocks for smooth and uniform lifting
- Large twin interlocking serriform mechanical safety racks with 18 level and locked positions
- Durable 72-inch "right side up" flushmount maintenance free slip plates. Oversize roller balls rotate on the underside of each slip plate and not on the deck surface. Strategically positioned openings in the deck under each slip plate quickly disperse water and dirt for maintenance free reliable performance
- Reinforced 26" wide decks for superb alignment accuracy with cars and dual wheel trucks
- Full-length base frame accommodates fast installation and adds to rugged durability
- 8 position adjustable work step on each side for easy access to under hood and steering wheel adjustments
- Distance between decks can be set at installation from 38" to 42" for optimum bay use and vehicle accessibility. 7,000 lb. rolling jacks (JBC 217) also adapt to the distance you choose
- Triple safety system with air actuated mechanical locks, pressure sensing flow control valves and velocity fuses
- Completely enclosed operator console protects electronic and hydraulic components
- Painted with a hybrid polyester and acrylic finish to resist brake fluid and road salt
- In-rack air kit for rolling jacks and air tools
- Optional stainless steel turnplates slide on a UHMW layer preventing deck scratching
- Flush mount model available with optional drive-thru capability
| Maximum Capacity: | 14,000 lbs. |
| Overall Width: | 92.5" |
| Width Between Runways: | 38" |
| Overall Length: Surface Mount Overall Length: Flush Mount |
269.625" 228.5" |
| 4-Wheel Alignment Wheelbase: | 154" |
| 2-Wheel Alignment Wheelbase: | 181" |
| Service Wheelbase: | 196" |
| Deck Surface: | 210" from front wheel stop to rear ramp |
| Maximum Raised Height: | 73.375" |
| Minimum Lowered Height: | 10" |
| Operator Console Dimensions: (W×H×D) | 25" × 45" × 17" |
| Lifting Time: | 75 seconds |
| Power Requirements (Standard): | 230 Volts AC, 60 Hz, 1 Ph, 20 Amps |
| Shipping Weight: | 4,980 lbs. |
Model 4814605AFFM - Flush Mount Pit Diagram (click image to enlarge)
This diagram is for promotion illustration purposes only, and should not be used as installation instructions. Contact your local Equipment Sales Specialist if further information is needed. Layout subject to change without notice, request detailed layout drawing for pit construction.
Model 4814605AF - Surface Mount Pit Diagram (click image to enlarge)
This diagram is for promotion illustration purposes only, and should not be used as installation instructions. Contact your local Equipment Sales Specialist if further information is needed.
Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders. ©2008 Snap-on Incorporated. All rights reserved. By accessing and using this website, you agree that you have read and are bound by the terms and conditions set forth in the Terms & Conditions of Use, including the arbitration provisions.
