12K 2-Post

Automotive/General-Purpose Lifts - Page: 1 | 2

Product Overview

John Bean 12K 2-Post Automotive/General-Purpose Lift

422012SS (12ft. Symmetric)
422012SS14 (14ft. Symmetric)

The 12k 2-Post automotive/general-purpose lift is versatile. Multi-stack pad adapters are standard, making it easy to reach the vehicle manufacturer’s pick-up points on either cars or trucks. An optional tower kit may be added to extend the height of the lift by 12" or 24".

Third-part tested, ANSI ALCTV-2006 standard, ALI certified by ETL.

    ALI/ETL Certified Get Adobe Reader!

Click on one of the section titles to learn more about the 12K 2-Post Automotive/General-Purpose Lift.

Features

  • Single-point safety lock release for 2-hand lift lowering - keeps the operator safe while lowering the lift!
  • Mechanical safety locks at 20 operating positions for added safety
  • Dual-function micro-switch activates vehicle height safety rod and increases life span of drive motor and cylinders
  • Industrial-strength columns for increased strength and durability
  • Pre-loaded lift arms are straight even when loaded!
  • Dual pre-stressed equalizing cables ensure level lifting!
  • Overhead beam reinforces lift structural integrity - 12’ or 14’
  • Steel cable pulleys with oil-impregnated iron bushings reduce the need for maintenance and increases life of lift
  • Optional two-position (12" or 24") bolt-on height extension kit available (JBC080)
  • Stack pad style lift works with both cars and trucks, includes a set of 3" and 6" stack adapters
  • Fully-supported arm pins prevent lifting arms from sagging. Nickel/zinc-plated arm pins increase lifting arm’s lifespan
  • Bolt-on gear-cut arm restraints increase lifting arm stability

Specifications

42012SS 42012SS14
Lifting Capacity 12,000 lbs 12,000 lbs
Overall Width 146" 146"
Overall Height 144" 168"
Width Between Posts 120" 120"
Maximum Lifting Height 80" (with 6" adapters) 80" (with 6" adapters)
Under Bar Clearance 139" 163"
Drive Through Width 109" 109"
Lifting Time 60 seconds 60 seconds
Shipping Weight 1,565 lbs 1,565 lbs
Power Requirements 230V, 1Ph, 60HZ 230V, 1Ph, 60HZ

Home | About | International | North American Service | My Account | Documentation | Contact | Valid CSS | Valid XHTML 1.0

HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders. ©2009 Snap-on Incorporated. All rights reserved. By accessing and using this website, you agree that you have read and are bound by the terms and conditions set forth in the Terms & Conditions of Use, including the arbitration provisions. This web site is best viewed in the most recent version of Internet Explorer, Firefox, or other compatible browsers.