Midrise
Specialty Lift
Models: JBC6501E
The 6,500 lb. capacity scissor lift model JBC6501E can be used as a pad lift or frame engaging lift. The three position flip pads with 360° rotation ensures proper contact with the vehicles manufactures recommended pick up points. Truck adapters are optional (JBC033) and easy to position. Portable and versatile, the power stand is the tow cart for the lift, it is simple to roll into position allowing a pin to engage a locator on the lift when lowered. Tilting the tow cart back raises the front of the lift allowing the operator to reposition, rolling on the cart and lift rollers. 115V outlet is used to power the electric version. Great lift for quick "add-a-bay" jobs, tire / brakes / body work / detailing....
Lube
Specialty Lift
Model: 43111L
Full lubrication service lifts are available as 11,000 lb. capacity 4-post lifts (43111L). This lift uses grip surfaces on ladders and cat-walks, walk-around surfaces. Walk ways are 24" wide. Standard features include rigid handle rails, man gate at ladder and rolling 22 gallon (100 litre) waste oil collection tank. Standard optional jack beams can be added to increase bay versatility.
Third party tested, ANSI ALCTV-2006 standard, ALI certified by ETL.
4-Post Value Line
Specialty Lift
Models: 43102Q, 43102QE
The 43102Q (172" wheelbase) and 43102QE (210"wheelbase) models are designed with fixed position 22" wide runways. No need to waste time making width adjustments for various sizes of vehicles. Low profile height of 7" allows for easy approach for most vehicles. Safety locks in each column with single point air release system, auto engaging mechanical drop locks and flow control device on the lifting cylinder make up the Triple Safety System ensure operator safety.
Third party tested, ANSI ALCTV-1998 standard, ALI certified by ETL.
Roller Jacks
Specialty Lift
Models: JBC145, JBC215, JBC216, JBC216E, JBC217, JBC207, JBCWB9, JBWT12, JBWT18, JBWT25, JBWT35
Wide ranges of capacity of jacks are available. All jacks use air over hydraulic power units providing strong smooth lift performance. All jacks are low in profile meaning that the jack is ready to use at all times, no need to raise the lift to swing into or out of position for use. Smooth positioning is achieved with calibrated spring-n-roller system carry the weight of the unloaded jack. Loading the jack transfers the weight from the rollers to an interlocking rail detail to the lift runway.
Third party tested, ANSI ALCTV-1998 standard, ALI certified by ETL. (as per the standard, jacks capacities (single or combined) cannot achieve greater lifting capacity then the lift in which they are to be operated on).
Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holders. ©2008 Snap-on Incorporated. All rights reserved. By accessing and using this website, you agree that you have read and are bound by the terms and conditions set forth in the Terms & Conditions of Use, including the arbitration provisions.
